Skip Navigation

Delivery forms and dimensions

Cold-rolled sheet
Tolerances according to DIN EN 10 131

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.40 – 4.00 600 – 1,950 -
Sheet 0.40 – 4.00 600 – 1,800 500 – 6,500
Slit strip 0.40 – 4.00 20 – 600 -

Electrolytically coated sheet
ZE/EG Zink
Tolerances according to DIN EN 10 131

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.40 – 3.00 600 – 1,950 -
Sheet 0.40 – 3.00 600 – 1,800 500 – 6,500
Slit strip 0.40 – 3.00 20 – 600 -

Hot-dip coated sheet
Z/GI Zink
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.30 – 4.00 600 – 1,950 -
Sheet 0.30 – 4.00 600 – 1,800 500 – 6,000
Slit strip 0.30 – 4.00 20 – 600 -

Hot-dip coated sheet
ZF/GA Galvannealed
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.50 – 2.60 600 – 1,950 -
Sheet 0.50 – 2.60 600 – 1,800 500 – 6,000
Slit strip 0.50 – 2.60 20 – 600 -

Hot-dip coated sheet
ZA GALFAN®
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.40 – 3.00 700 – 1,600 -
Sheet 0.40 – 3.00 700 – 1,600 500 – 6,000
Slit strip 0.40 – 3.00 20 – 600 -

Hot-dip coated sheet
AZ GALVALUME®
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.40 – 2.00 700 – 1,525 -
Sheet 0.40 – 2.00 700 – 1,525 500 – 6,000
Slit strip 0.40 – 2.00 20 – 600 -

Hot-dip aluminized sheet
fal AS
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.30 – 3.00 600 – 1,600 -
Sheet 0.30 – 3.00 600 – 1,600 500 – 6,000
Slit strip 0.30 – 3.00 20 – 600 -

Hot-dip coated sheet
ZM EcoProtect®
Tolerances according to DIN EN 10 143

THICKNESS1
from_to in mm
WIDTH1*
from_to in mm
LENGTH
from_to in mm
Strip 0.30 – 3.00 600 – 1,650 -
Sheet 0.30 – 3.00 600 – 1,650 500 – 6,000
Slit strip 0.30 – 3.00 20 – 600 -

1 Further thicknesses/dimensions on request

* Depending on the steel grade and thickness

To the top