Skip Navigation

powercore® A – nicht kornorientiertes Elektroband

Bei den schlussgeglühten powercore®-Standardsorten sind alle für die Anwendungen wichtigen Qualitätsmerkmale voll ausgeprägt, die magnetischen Werte sind in vielen Fällen besser als die genormten.

Durch den Einsatz modernster Prozesstechnik und der sicheren Beherrschung der Verfahren sind die Produkteigenschaften äußerst gleichmäßig. Die Verwendung des vorwiegend aus der Gießwalzanlage stammenden Warmbandes ermöglicht niedrige Ummagnetisierungsverluste bereits bei geringer Legierungsgehalten an Silizium und Aluminium.

Da die Sättigungspolarisation mit der Reduzierung der Legierungsgehalte ansteigt, weisen unsere Sorten trotz geringer Ummagnetisierungsverluste tendenziell höhere Polarisationswerte im oberen Magnetisierungsbereich auf.

Standardsorte schlussgeglüht
DIN EN 10 106

Stahlsorten­bezeichnung Norm­bezeichnung DICKE DICHTE MAX. UMMAGNETISIERUNGS­VERLUST BEI MIN. POLA­RISATION BEI
powercore®
mm

kg/dm3
50 Hz
1,5 T
W/kg
50 Hz
1,0 T1)
W/kg
60 Hz
1,5 T
W/lb
60 Hz
1,0 T1)
W/lb
2500 A/m
T
5000 A/m
T
10000 A/m
T
powercore® 210-35A2) Werkssondergüte 0,35 7,60 2,10 - 1,21 - 1,49 1,60 1,70
powercore® M235-35A M235-35A 0,35 7,60 2,35 0,95 1,35 0,55 1,49 1,60 1,70
powercore® M250-35A M250-35A 0,35 7,60 2,50 1,05 1,44 0,59 1,49 1,60 1,70
powercore® M270-35A M270-35A 0,35 7,65 2,70 1,10 1,55 0,63 1,49 1,60 1,70
powercore® M300-35A M300-35A 0,35 7,65 3,00 1,20 1,72 0,69 1,49 1,60 1,70
powercore® M330-35A3) M330-35A 0,35 7,65 3,30 1,30 1,90 0,75 1,49 1,60 1,70
powercore® 230-50A2) Werkssondergüte 0,50 7,60 2,30 - 1,32 - 1,49 1,60 1,70
powercore® M250-50A M250-50A 0,50 7,60 2,50 1,05 1,44 0,59 1,49 1,60 1,70
powercore® M270-50A M270-50A 0,50 7,60 2,70 1,10 1,55 0,63 1,49 1,60 1,70
powercore® M290-50A M290-50A 0,50 7,60 2,90 1,15 1,67 0,66 1,49 1,60 1,70
powercore® M310-50A M310-50A 0,50 7,65 3,10 1,25 1,78 0,72 1,49 1,60 1,70
powercore® M330-50A M330-50A 0,50 7,65 3,30 1,35 1,90 0,78 1,49 1,60 1,70
powercore® M350-50A3) M350-50A 0,50 7,65 3,50 1,50 2,01 0,86 1,50 1,60 1,70
powercore® M400-50A M400-50A 0,50 7,70 4,00 1,70 2,30 0,98 1,53 1,63 1,73
powercore® M470-50A M470-50A 0,50 7,70 4,70 2,00 2,70 1,15 1,54 1,64 1,74
powercore® M530-50A M530-50A 0,50 7,70 5,30 2,30 3,05 1,32 1,56 1,65 1,75
powercore® M600-50A M600-50A 0,50 7,75 6,00 2,60 3,45 1,49 1,57 1,66 1,76
powercore® M700-50A M700-50A 0,50 7,80 7,00 3,00 4,02 1,72 1,60 1,69 1,77
powercore® M800-50A M800-50A 0,50 7,80 8,00 3,60 4,60 2,07 1,60 1,70 1,78
powercore® M940-50A M940-50A 0,50 7,85 9,40 4,20 5,40 2,41 1,62 1,72 1,81
powercore® M310-65A M310-65A 0,65 7,60 3,10 1,25 1,78 0,72 1,49 1,60 1,70
powercore® M330-65A M330-65A 0,65 7,60 3,30 1,35 1,90 0,78 1,49 1.60 1,70
powercore® M350-65A M350-65A 0,65 7,60 3,50 1,50 2,01 0,86 1,49 1,60 1,70
powercore® M400-65A M400-65A 0,65 7,65 4,00 1,70 2,30 0,98 1,52 1.62 1,73
powercore® M470-65A M470-65A 0,65 7,65 4,70 2,00 2,70 1,15 1,53 1,63 1,73
powercore® M530-65A M530-65A 0,65 7,70 5,30 2,30 3,05 1,32 1,54 1,64 1,74
powercore® M600-65A M600-65A 0,65 7,75 6,00 2,60 3,45 1,49 1,56 1,66 1,76
powercore® M700-65A M700-65A 0,65 7,75 7,00 3,00 4,02 1,72 1,57 1,67 1,76
powercore® M800-65A M800-65A 0,65 7,80 8,00 3,60 4,60 2,07 1,60 1,70 1,78
powercore® M1000-65A M1000-65A 0,65 7,80 10,00 4,40 5,75 2,53 1,61 1,71 1,80
powercore® M600-100A M600-100A 1,00 7,60 6,00 2,60 3,45 1,49 1,53 1,63 1,72
powercore® M700-100A M700-100A 1,00 7,65 7,00 3,00 4,02 1,72 1,54 1,64 1,73
powercore® M800-100A M800-100A 1,00 7,70 8,00 3,60 4,60 2,07 1,56 1,66 1,75
powercore® 940-100A Werkssondergüte 1,00 7,80 9,40 4,20 5,40 2,41 1,58 1,68 1,78
powercore® M1000-100A M1000-100A 1,00 7,80 10,00 4,40 5,75 2,53 1,58 1,68 1,76
powercore® M1300-100A M1300-100A 1,00 7,80 13,00 5,80 7,47 3,33 1,60 1,70 1,78

1) Die Größe des Unmagnetisierungsverlustes bei 1,0 T ist ein Anhaltswert und dient nur zur Information.
2) Keine Standardsorte, Werte auf Anfrage.

Normenvergleich für powercore® A

Sorteneinteilung powercore® nach Normen, schlussgeglüht

Nenndicke
mm
powercore®–Sorte Sorte nach
DIN EN 10106


1996
Sorte nach
IEC 60404–8–4


1988
Sorte nach
JIS C 2552

1986
Sorte nach
ASTM A 677 M


1989
Sorte nach
ASTM A 677


1989
Sorte nach
ASI
M 235-35 A M 235-35 A - 35-A-230 - - -
0,35 M 250-35 A M 250-35 A 250-35-A5 35-A-250 36F 320M 36F 145 M-15
M 270-35 A M 270-35 A 270-35-A5 35-A-270 36F 348M 36F 158 M-19
M 300-35 A M 300-35 A 300-35-A5 35-A-300 36F 370M/397M 36F 168/180 M-22/M-27
M 330-35 A M 330-35 A 33-35-A5 - 36F 419M 36F 190 M-36
M 250-50 A M 250-50 A - - - - -
0,50 M 270-50 A M 270-50 A 270-50-A 5 50-A-270 47F 370M 47F 168 M-15
M 290-50 A M 290-50 A 290-50-A 5 50-A-290 47F 384M 47F 174 M-19
M 310-50 A M 310-50 A 310-50-A 5 50-A-310 47F 408M/419M 47F 185/190 M-22/M-27
M 330-50 A M 330-50 A 330-50-A 5 50-A-330 47F 452M 47F 205 M-36
M 350-50 A M 350-50 A 350-50-A 5 50-A-350 47F 507M 47F 230 M-43
M 400-50 A M 400-50 A 400-50-A 5 50-A-400 47F 617M 47F 280 -
M 470-50 A M 470-50 A 470-50-A 5 50-A-470 47F 672M 47F 305 M-45
M 530-50 A M 530-50 A 530-50-A 5 - - - -
M 600-50 A M 600-50 A 600-50-A 5 50-A-600 47F 882M 47F 400 M-47
M 700-50 A M 700-50 A 700-50-A 5 50-A-700 47F 992M 47F 450 -
M 800-50 A M 800-50 A 800-50-A 5 50-A-800 - - -
M 940-50 A M 940-50 A - 50-A-1000 - - -
M 310-65 A M 310-65 A - - - - -
0,65 M 330-65 A M 330-65 A - - - - -
M 350-65 A M 350-65 A 350-65-A 5 - 64F 459M/480M 64F 208/218 M-19/M-22
M 400-65 A M 400-65 A 400-65-A 5 - 64F 496M/529M 64F 225/240 M-27/M-36
M 470-65 A M 470-65 A 470-65-A 5 - 64F 595M 64F 270 M-43
M 530-65 A M 530-65 A 530-65-A 5 - 64F 705M 64F 320 -
M 600-65 A M 600-65 A 600-65-A 5 - 64F 792M 64F 360 M-45
M 700-65 A M 700-65 A 700-65-A 5 - 64F 882 64F 400 -
M 800-65 A M 800-65 A 800-65-A 5 65-A-800 64F 1078M 64F 490 M-47
M 1000-65 A - 1000-65-A 5 65-A-1000 - - -
M 600-100 A M 600-100 A - - - - -
1,00 M 700-100 A M 700-100 A - - - - -
M 800-100 A M 800-100 A - - - - -
940-100 A - - - - - -
M 1000-100 A M 1000-100 A - - - - -
M 1300-100 A M 1300-100 A - - - - -

powercore® A Sorten im Vergleich mit powercore® AP-Sorten

powercore® A Sorten im Vergleich mit PowerCore® AP-Sorten

Allgemeine Kontaktanfrage

*

** Pflichtfeld

Kontakt

thyssenkrupp Steel Europe AG

Kaiser-Wilhelm-Straße 100

47166 Duisburg

Telefon +49 (0)203 52-0

nach oben