Skip Navigation

Geometrical tolerances

THICKNESS TOLERANCES
Max. deviation from the nominal thickness +/- 0.020 mm
Max. thickness difference parallel to the rolling direction within a strip section of 1,000 mm length 0.025 mm
Max. thickness difference perpendicular to the rolling direction, measured at least 40 mm from the edge 0.020 mm
WIDTHS TOLERANCES
Full width +/- 1 mm
Slit width* < 150 mm 0/- 0.2 mm
> 150 – 400 mm 0/- 0.3 mm
> 400 – 750 mm 0/- 0.5 mm
> 750 – 1,000 mm 0/- 0.6 mm

* Plus tolerances must be specially agreed when ordering.

General inquiry

*

** Mandatory

Contact

thyssenkrupp Steel Europe AG

Kaiser-Wilhelm-Strasse 100

47166 Duisburg, Germany

+49 (0)203 52-0

To the top